SHAVER HD-8 POST DRIVER, MECHANICAL TILT & OFFSET

Shaver post driver for pounding posts into the ground without digging a hole. Suitable for mounting on small utility tractors and larger compact tractors.

The HD-8-S is designed with a built in supporting leg to steady the machine during the driving process.

Mounting kits for the driver must be ordered separately, see related items below.

Shaver post drivers can be mounted on a tractor or skid steer loader. Oil from the tractor hydraulic system raises a spring loaded driving ram. With a lever, the ram hits the post and pushes it into the ground. The oil goes back into the tractor reservoir.

The operator has complete control over the driving operation. The post is secured with a spring-loaded arm, so the operator can stand safely to the side while driving. Gentle blows start the post into the ground. At full stroke, the ram delivers 30,000 lbs of impact to the post.

All Shaver drivers use tilt and offset to make driving a vertical post easy. A screw crank system or hydraulic cylinders control the tilt and offset functions. (This SKU uses a mechanical tilt and offset feature.)

There are three models of driver to choose from: the HD-8, HD-10, and HD-12. The HD-8 can be mounted on smaller utility or compact tractors. It only requires 3 to 4 gallons of oil flow per minute. The HD-8 can handle posts up to 7" in diameter, and 10' long. 

The mounting kit must be ordered separately, see mounting options below.

Please note that the Shaver HD-8 Post Driver is not designed for commercial use.

Mounting kits for the driver must be ordered separately, see related items below.

• Impact: 30,000 lbs.
• Max post width: 7"
• Max post length: 10'
• Tilt and offset: 15° both ways
• Flow requirement: 3-4 GPM
• Manual screw tilt plate for tilt and offset
• Shipping weight: 440 lbs.
• Mounting kit must be ordered separately
• Contact us for a complete price quote